Blenders / Mixers
Item # bm-91
20 Cu.Ft. Twin Shell Blender Patterson Kelley. 5 HP, 208-220/440 V, 1750 RPMi, 100 RPMo, 17.1:1 ratio. Stainless Steel
Item # bm-90
Gemco 30 cu.ft. "V" twin shell blender. Stainless Steel. Rated 100 #/cu.ft. 5HP drive. Shell 13.6 rpm
304 Stainless Steel
Item # bm-81
70 Cu.Ft. Pfaudler Double Cone jacketed blender/dryer. Driven by 10 HP motor into Reeves Varidrive. Rated 20 PSI @ 350 internal, 45 PSI @ 350 jacket. Quotes As is where is.
Item # bm-74
24" diameter chamber PK Zig Zag Continuous Blender, size 24 CSN. Maximum density: 55 lbs/cu.ft., with 10 HP, 230/460 V, GE Motor and gear chain drive. Believed to be Unused.
Item # bm-72
Stainless Steel 40 cu. Ft. double ribbon blender with a 6" x 92 twin-shaft continuous discharge feeder/ lump breaker/ de-lumper mounted in bottom of trough. Blender is powered by 2 HP motor. Continuous
304 Stainless Steel
Item # bm-71
50 Cu.Ft. Stainless Steel Double ribbon blender. Stainless ribbon has bolt on teflon wiper. 10" Bottom end outlet. Chain driven. 17 RPM ribbon. 7.5 HP, 1740 RPM, 575 volt, 8.6 amp, motor into gear reducer ratio 20.9:1, 84 rpm output.
Item # bm-411
*15% OFF* used High Speed Disperser built by Premier. Model D25 Dispersator, s/n D25-0019. Great for mixing 5 gallon buckets. Driven by 1.5 HP, 3450 RPM, 208-230/460 V, UL rated explosion proof XP motor. Stainless Steel shaft is approx. 12" L with dispersion blade. High Shear post mixer. VIDEO OF UNIT RUNNING AVAILABLE UPON REQUEST.
Item # bm-410
used Lab Mixer on stand with variable speed explosion proof (UL, XP) controller. Stand has base for 11.5" diameter (standard 5 gallon bucket). Dayton 1/6 HP, 90 V, 1800 RPM drive motor. Stainless steel agitator shaft 1/2" dia x 12" L with 3" dia blades. Stand mount is 30" H.
Item # bm-409
Used Hockmeyer Disperser, Model HV15. 1-3/4" Diameter x 41" long 304 stainless steel shaft with a 5-1/2'' diameter blade. Will center in an approximate 40" diameter can. 360 degree rotation, 53-1/2" rise, air/oil lift, tank holder. Hand operated variable speed pulley drive, speed range approximately 650-3200 rpm. Unit driven by a 15 hp, 3/60/230/460 volt, 1760 rpm XP motor. Base mounted
Item # bm-408
8 Qt. used Patterson Kelley Twin Shell, Liquid-Solids Blender. Stainless Steel. PK# LB-863. Laboratory blender, pilot scale blender.
Item # bm-407
8 Qt. used, Patterson Kelley Twin Shell, Liquid-Solids Blender. Stainless Steel. Unit has intensifier bar. PK# LB-10231. Bar drive is 1 HP, 3450 RPM, 115/230 v, 1 ph. Blender drive is 1/4 HP, 1725 rpm 115/230 volt. Rated 250 #/cu.ft. Laboratory blender, pilot scale blender.
Item # bm-406
used 30 Cubic Foot Stainless Steel ribbon blender built by Hayes and Stoltz. Model HR30-1095SS. Has 10 HP, 230/460 volt, 1725 rpm motor into Dodge gear reducer. Has approx. 7" x7" discharge with air operated slide gate valve. Trough is 32â€ x 64â€ x 32â€ total depth. Last used in sanitary food plant.
HAYES and STOLTZ
Item # bm-403
used Continuous Jacketed Paddle Mixer/Blender/Dryer/Conveyor. Trough is 20" wide x 22" deep x 12' Lgth. Through is jacketed and shaft for paddles can be heated/cooled. Drive is 1.5 HP, 208-230/460 volt, 1725 rpm into gear reducer with 45.91:1 ratio. Discharge is approx. 17" x 7". Unit has ability to incline and be portable on wheels. Stainless Steel Construction. has 3" Drain. Approx. 20 CU.FT. working capacity. Last used in food plant in a sanitary application.
20" x 12'
Item # bm-402
used 20 Cu.Ft. Marion Paddle Mixer/Blender, Stainless Steel, Sanitary construction. Model SPY-3048-Batch Mixer. Trough is 48" lgth x 39" wide S/N SP-11007. 15 HP, 230/460 volt, 1765 rpm mptor into Eurodrive 44.02:1 gearbox. Has ball valve for discharge with actuator. Last used in food plant.
Item # bm-401
used Gemco 4 Quart, (1/8th Cu.Ft.) Twin Shell V Blender. Stainless Steel. S/N LB-86705. Shells are 6" Dia. x 10" Lgth. 7" from center line to outlet. Laboratory blender, pilot scale blender.
Item # bm-400
used Gemco 16 Quart Twin Shell V Blender. Stainless Steel. S/N LB85662. Shells are 9" Dia. x 15" Lgth. 10" from center line to outlet. Laboratory blender, pilot scale blender.
Item # bm-399
used Gemco Bench top Slant Cone/Double Cone Blender 16 Qt., 0.5 Cubic Foot. 115 Volt. S/N LB-90980. Shell is approx. 14" diameter x 9" from center line to outlet. 3" Outlet. Laboratory blender, pilot scale blender.
Item # bm-398
used Patterson Kelley Yoke Style Blendmaster Laboratory Mixer. Twin Shell. Includes (2) Stainless Steel Shells. (1) Shell is 4" Dia. x 9" Lgth.(approx 2 Qt.). (1) Shell is 3.5" dia. x 7" lgth. (approx 1 Qt.) Laboratory blender, pilot scale blender.
YOKE BLEND MASTER
Item # bm-395
Used Gemco Model LB-85687 Double Cone Blender/Mixer. 16 Quart, approx. .5 CU.FT. Stainless steel. Shell is 14" Dia. x 9" from center line to outlet. 3" Outlet. Unit equipped with Intensifier bar. Missing discharge cover. Laboratory blender, pilot scale blender.
Item # bm-394
used Littleford Model FKM-1200D Batch Type Plow/Plough Mixer, Serial Number: 41626-4181 , 26.1 Cubic Feet Working Capacity (43.4 Total), 316 Stainless Steel. Non-jacketed chamber 32" diameter x 99" straight side, 5" diameter shaft with 8 bolt-on "T" paddles, 2 end scrapers. Driven by a 40hp, 3/60/460 volt, 1725 rpm motor thru a Falk reducer, ratio 11.6 to 1, input/output rpm 1750/155. Openings: top 4", 6", 8", 10". 2 side access doors
316 STAINLESS STEEL
Item # bm-393
Used Brogli Multi Homo mixer. Stainless steel contacts. Model Multi Homo Type MH10C. 10 liter working capacity. .28 kw/.37 kw motor 3 phase 60 cycle 208 volt. Triple motion agitator. Anchor Hi/Lo Scraper. Spiral Agitators. Homogenizer. 3 phase 60 cycle 208 volt. 1600/3400 rpmTop mounted light. Mixer bowl rated 25 psi / Full vacuum @ 400 degrees F. Jacket rated 43.5 psi @ 400 degrees F. Serial Number WO2762. Built 1987. Bowl mounted on castors with manual lift. Vacuum pump inside control cabinet. Controls. Serial Number 2762. Pharmaceutical Mixer, internal polished.
Item # bm-388
used 125 Cu.Ft. Stainless Steel Ribbon Blender. BlenTech Model SM-54084. 316L Stainless Steel. Unit Trough is 84" lgth. X 54" wide. End discharge. Has lid with actuators. Driven by 25 HP motor rated at 30 rpm output. Rated at 127 Cu.Ft. to top of ribbon. Unit has #2 finish. Comes with Fristam FLK250 Rotary lobe discharge pump. Last used in a Sanitary Food Plant.
316L STAINLESS STEEL
Item # bm-387
(2) used BlenTech 1200 Gallon (160 Cu.Ft.) Jacketed Mixer/Cooker Kettle. Model BT-600960ZX. BlenTherm units. 316 Stainless Steel. Ribbon/Paddle agitators equipped with scraper blades driven by 30 HP drive rated at 5-30 rpm output speed. Steam Jacket rated 90 PSI @ 331 Deg.F. Last used in sanitary food plant. Can be used for sauces, soups and more.
316 STAINLESS STEEL
Item # bm-386
USED GEA AEROMATIC FIELDER Model PMA-1 High Shear Mixer/Granulator with MiniPpurge system. Rotor 1 RPM 55-556. Rotor 2 RPM 1500-3000. Only Rotor 1 installed. Bowl is 10" dia. x 8" Ht. S/N 06358.1310
GEA AEROMATIC FIELDER
Item # bm-384
unused OAKES Model 4MBH31A High Shear, Bearing Housing Mixer. Hastelloy Contact parts. 1/2" Inlet/Outlet. Includes AB Powerflex inverter. According to the Mfr. "The Bearing Housing Mixer is ideally suited for highly viscous slurry applications, or when your usage requires only the mixing head and drive assembly. The unique design of the high shear Oakes Rotor/Stator Mixing Head is the key to consistent final densities. Aerate and/or homogenize slurry with minimal heat rise." Applications include: biscuit marshmallow, cake batter, candy marshmallow, cheese cake, icing, layer cake, nougat, pie fillings, soy bean, whipped butter and more.
Item # bm-383
2 Gallon Paul Abbe Jacketed Double Arm/Sigma Blade Mixer. Model SBM1. Stainless steel construction. Mixing chamber is 7"x 9.5" wide x 9" deep. Approx 2 Gallon (.25 Cu.Ft.) Rated Full Vacuum internal and jacket rated 14.7 PSI @ 250 Deg.F. Motor is Explosion Proof (XP) 2 HP, 230/460 volt, 1730 rpm Reeves Vari-Drive. Last used in sanitary pharmaceutical application.
DOUBLE ARM / SIGMA BLADE
PAUL O ABBE
Item # bm-381
2 Gallon Paul Abbe Jacketed Double Arm/Sigma Blade Mixer. Model SBM1. Stainless steel construction. Mixing chamber is 7"x 9.5" wide x 9" deep. Approx 2 Gallon (.25 Cu.Ft.) Rated Full Vacuum internal and jacket rated 14.7 PSI @ 250 Deg.F. Motor is Explosion Proof (XP) 2/5 HP, 230/460 volt, 1750 rpm into gear reducer. Last used in sanitary pharmaceutical application.
DOUBLE ARM / SIGMA BLADE
PAUL O ABBE
Item # bm-380
(2) MixMor clamp-on agitator/mixer. Model G-15. UL rated (explosion proof, XP). Stainless steel shaft 1.25" dia x 36" L. Unit 5' OAH. 2 blades on each shaft (one prop type, one disperser type). 1.5/1 HP, 230/460/190/380 V, 1760/1460 RPM, 60/50 Hz. There are (2) mounting stands/lifts available, 7' OAH (sold separately).
Item # bm-377
(2) used 87 Cu.Ft. Bepex Ribbon Blenders with Choppers. Stainless steel. Model IMXS-87. Trough is 8'3" lgth. x 3'8" wide x 4' deep. Slide gate valve with actuator on center discharge. Drive is 40 HP, 1770 rpm, 230/460 volt into Dodge gear reducer with 25.6:1 ratio. Unit has (2) 25 HP, 1765 rpm, 230/460 volt Smizers (Choppers/Lumpbreakers). Control panel included. Last used in Sanitary Food Plant.
Item # bm-374
Quadro Y-Tron Model Z3 Multi-row toothed rotor-stator mixer/mill. S/N Z3-0013. Rated up to 100 GPM. Designed for inline, high-shear process applications such as immiscible phase emulsifying/homogenizing, wet grinding, deagglomeration and fine solids dispersing.
Item # bm-373
used Arde Barinco Cavitron Continuous High Shear Homogenizer/Mixer/Reactor System. Model 1025. Rated 4-66 GPM. Has 40 HP, 3540 rpm, 575 volt Explosion Proof Inverter Duty Motor. Unit mounted on Stainless Skid with cooler. Free of rheological restrictions, Cavitron can process solid, liquid, gaseous, fibrous and pasty media. That makes it widely applicable in a variety of industries including Food, Pharmaceutical, Chemical and Cosmetics.
Item # bm-369
used 20 Cu.Ft. SCOTT Stainless Steel Ribbon Blender. Trough is 30" wide X 48" lgth X 36" Deep. Has 4" Center bottom outlet. Capacity is approximate. Last used in spice blending plant. Can come with top mounted dust collector.
Item # bm-368
used 30 Cu.Ft. DAY Ribbon Blender. Stainless steel construction. Trough is 30" wide X 78" lgth X 33" Deep. Has 4" Center bottom outlet. Capacity is approximate. Unit has Motor and chain for drive. Last used in spice blending plant. Can come with top mounted dust collector.
Item # bm-356
Used approx. 1 Cu.Ft Marion Type Paddle Mixer, Stainless steel. Equipped with electric blanket heater jacket. 12" wide X 14" long X 16" deep. Safety grate on top. Hinged top cover. 1/2 Hp 3 phase 60 cycle 230/460 volt, 1700 rpm motor with Sew Eurodrive reducer. Center bottom discharge. Mounted with legs.
Item # bm-355
Used Approx. 25 gallon capacity Myers Double Motion change can mixer model 550A-5-5-1475. Stainless steel contacts. Can is stainless steel and approximately 20" diameter X 20" deep, open top with dished bottom and center bottom outlet, on castors. 3 Wing anchor agitator, 5 hp 3 phase 60 cycle 230/460 volt 1740 rpm. High speed prop agitator, 5 hp 3 phase 60 cycle 230/460 volt. Hydraulic lift. Built 2001.
Item # bm-353
Used Ross Model PVM-2, triple motion stainless steel mixer. 2 gallon. Stainless steel jacketed change can. Tri-Shaft Vacuum mixer. Triple mixers including (1) 1/2 hp 3 phase 60 cycel 208-230/460 volt 1725 rpm three wing anchor agitator with scrapers on side and bottom of can. (1) 3/4 hp 3 phase 60 cycle 208-230/460 volt 3450 rpm High Speed disperser. (1) 3/4 hp 3 phase 60 cycle 208- 230/460 volt 3450 rpm High shear rotor stator mixer. Mixer motors 30 Hp 3 phase 60 cycle 230/460 volt 1765 rpm. Change can is jacketed and on castors. Hydraulic lift. Includes Mokon heater Model DB41109BF 3 phase 60 cycle 460 volt 9 kw. Mounted all on mobile cart.
Item # bm-352
Used Ross Model PVM 40 triple motion stainless steel Vacuum rated mixer. 40 gallon. Stainless steel jacketed change can 50 psi. Tri-Shaft Vacuum mixer. Triple mixers including (1) three wing anchor agitator with scrapers on side and bottom of can and (2) High Speed disperser (one shaft is carbon steel, all other shafts/blades stainless steel). Change can is on castors. Can serial number 11012-1A, National board number 414. Built 1994. Hydraulic lift.
Item # bm-351
Used Ross Model PVM 40 dual motion stainless steel mixer. 40 gallon. S/N 4075. Stainless steel jacketed change can 50 psi. Vacuum mixer. Dual mixers including (1) three wing anchor agitator with scrapers on side and bottom of can and (1) High Speed disperser. Rear motor is 3 HP, 208-230/460, 1745 rpm and the main drive is 5 HP, 208-230/460 volt, 1760 rpm. Change can is on castors. Can serial number 11012-1B, National board number 415. Built 1994. Hydraulic lift.
Item # bm-350
Used Ross Model PVM300 Triple Motion Stainless Steel Mixer. Mixing capacity 150 to 300 gallon. Full capacity 398 gallon. Stainless steel jacketed change can 15 psi. Vacuum mixer. Triple mixers including (1) three wing anchor agitator with scrapers on side and bottom of can. (1) High Speed disperser. (1) High shear rotor stator mixer (requires head and cage). Mixer motors (1) 15 Hp and (2) 30 Hp 3 phase 60 cycle 230/460 volt 1765 rpm. Change can is jacketed and on castors. Hydraulic lift.
Item # bm-349
Used Ross Model PVM300 dual motion stainless steel mixer. Mixing capacity 150 to 300 gallon. Full capacity 398 gallon. Stainless steel jacketed change can. Vacuum mixer. Dual mixers including (1) three wing anchor agitator with scrapers on side and bottom of can. (1) High Speed disperser. Mixer motors 20 Hp 3 phase 50 cycle (with Foxboro Jordan 50/60 cycle converter). Change can is jacketed. Hydraulic lift.
Item # bm-348
used 2400 liter Fryma VME-2400 Vacuum Processing Vessel, Dual Shaft, Sanitary construction, 2400 Liter (630 Gallon) working capacity. There are two agitator drives. A 7.5 hp motor drives a center 3 blade counter rotating agitator and a scrape agitator through a chain drive. A 50 hp motor drives a disperser type agitator off to the side of the center shaft. Working temperatures are 150 Deg.C (302 Deg.F.)for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. The top has an 8" flanged opening that can be used for a colloid mill (not included) currently it is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/460 vac 3 ph electrical supply. Previously used for toothpaste. Tri-Shaft
Item # bm-347
used 75 HP Philadelphia Gear box for Mixer. Size/Type 3809S. Order # 22220. Input rpm 1750, output 230 rpm. 7.6:1 ratio. S/N 98DID0229-1.
Item # bm-346
used Lightnin model MXC-70V Mixer. 30 HP Explosion Proof (XP) Mixer/Agitator/Disperser. Output RPM 900/450. Motor is 30 HP, 1175 rpm, 460 volt. Has Johnson Speed Controller/Selector. Stainless Steel Shaft is 2.5" dia. x 98" lgth. with prop and 14" dia. Dispersion Blade (Shaft reduces to 2" Dia. near Blades). Approx. 12" Flg. mount (19" OD. , 17" Bolt centers).
Item # bm-345
used 40 CU.FT. Patterson Kelley Twin Shell "V" Blender with Intensifier Bar. Stainless Steel. Rated 65 #/cu.ft. Min drive is 5 HP, 208 volt, 1740 rpm into Foote Bros gear reducer with 100 rpm output. Bar drive is 15 HP 200 volt, 1775 rpm. Included leg extensions. Last used in Food Plant.
Item # bm-343
Clamp-on Lightnin Mixer model ND-1, 1/3 HP, 220/440 volt, 1725 RPM into gear reducer. Explosion Proof (XP). 316 Stainless Steel shaft and blades. 44" L x 1/2" dia. shaft with (2) prop type blades that are approx. 9" diameter. Previously mounted on tank that was 3'3" dia. x 3'9" T/T.
316 Stainless Steel
Item # bm-336
Used 1 HP Clamp-On Mixer. Has Baldor 1 HP, 90 volt, 1750 RPM with Lesson adjustable speed motor. Stainless Steel shaft ~2'6" lgth. with 4.5" dia. prop. Clamp is Not available.
Item # bm-335
Used 1.17 HP Lightnin Clamp-On Mixer. Model XJA-100. Has 1.17 HP, 200-230/460 volt, 1725 RPM motor. Stainless Steel shaft ~39" lgth. with (2) 4.5" dia. props.
Item # bm-331
used Littleford Model FKM-1200-D Jacketed Plough/Plow Mixer/Dryer. 43 Cu.Ft. total, 26 Cu.Ft. working capacity. Unit equipped with 34 Sq.Ft. Jacketed Dust Collector/Filter. Vessel rated Full Vacuum. Jacket rated 90 PSI @ 330 Deg.F. End plates are also jacketed. Main shaft is hollowed to accommodate heating or cooling media. 304 Stainless Steel. 75 HP, 460 volt motor. Built in 2008 and had little use.
304 STAINLESS STEEL
LITTLEFORD DAY INC.
Item # bm-320
used Littleford Lodige Plow Mixer model FM-130. Stainless steel construction. 2.8. cu. ft. working/4.6 cu. ft. total capacity. Jacketed body. Shaft with plow blades and (1) high speed chopper. Both motors are 5 HP. On legs
Item # bm-313
used 300 Cu.Ft. Patterson Kelley Twin Shell "V" Blender. Stainless Steel. Rated 40 Lbs/Cu.Ft. Driven by 20 HP, 208-220/440 volt, 1770 rpm motor into gear reducer.
Item # bm-312
used Cowles Dissolver model 7-VTV. Has 36" Stainless Steel Shaft. 7.5 HP, 230/460 volt. Has Baldor Vari-Speed Controller. Air over oil lift. Great for mixing 55 gallon drums. 55 gallon drum mixer. See our stainless steel drums for sale http://www.ecrecon.com/category/21/?search=drum
Item # bm-311
used 53 Cu.Ft. American Process Systems Paddle Blender model FZM-53 (1500 Liter) Twin Shaft Fluidized Zone Mixer/Paddle blender. 304 Stainless Steel. 30 HP 230/460 volt motor. Mixer paddles are 25 RPM. Includes Control Panel. Last used in a sanitary application in food and nutraceutical plant. As per American Process Systems, Fluidized Zone Mixers, provide quick yet gentle blending, short cycles, low operating costs, minimal product degradation and one of the highest production capacities of any other mixer type. Unit can come with Drum Dumper and mezzanine structure for additional cost.
American Process Systems/Eirich
Item # bm-300
200 Gallon BREDDO Model LDTW-200 Jacketed Likwifier/Liquifier/Liquefier on Casters. Driven by 20 HP, 230/460 volt motor. 90 PSI Jacket. Has Watlow electric heater with pump and control. Has AB starters for Thompsen model 69804-04, 1.5 HP, 208-230/460 volt 1755 rpm transfer pump and Liquifier unit. Last used to make Sugar Glaze for Bakery in sanitary application. Overall dimensions approx. 5'10" x 4'4" wide x 6'6" lgth.
Item # bm-299
Ross VMC-2 Triple Shaft (tri-shaft) Versamixer Mixer. 316 Stainless Steel construction. Vacuum capable. 2 gallon jacketed Vacuum capable mixing can with provision for thermal couple probe (Type J). 50 PSI jacket. Sanitary 80 grit finish. Explosion proof drives and controls. Anchor agitator driven by 1HP, 230/460 volt xp motor (2) high speed dispersers each driven by 1 HP, 230/460 volt motor. Air over bowl lift/lower mechanism. Lift System: 80-100psig/ 4-5 scfm. Electrical 115V/60Hz. Included are the the unit and electrical mounted on the unit. No main control panel included. Serial# 104930. High viscosity mixer.
316 STAINLESS STEEL
Item # bm-298
Oakes Model 14 Continuous, inline Mixer. Has high shear rotor/stator mixing head. Driven by 15 HP, 1760 rpm, 230/460 volt motor into gear box. 1.5" Sanitary tri-clamp inlet, 2" outlet. Oakes mixers are designed to homogenize or aerate slurry to produce a highly uniform and stable cell structure. Last used in Sanitary application in food plant. Stamped on mixer B14-1317 and F14-1304.
Item # bm-293
Quadro Y-Tron Model Z5 Multi-row toothed rotor-stator mixer/mill. (3) Stage unit. S/N Z5-0103. Rated up to 300 GPM. Stator gap size in 0.5mm. Driven by 40 HP, 230/460 volt, 1775 rpm, WEG inverter duty/severe duty motor. Mechanical Seal. Designed for inline, high-shear process applications such as immiscible phase emulsifying/homogenizing, wet grinding, deagglomeration and fine solids dispersing. Sanitary construction. Built in 2013. Appears to be Unused. Includes spare seal kit and bearings ($3500). Cost for new unit approx. $60,000. Quadro Ytron.
Item # bm-291
Used 120 Liter (Approx 30 Gal) Ystral Triple Motion Jacketed Mixing vessel, Model X-3/D. Flat top, dished bottom, leg mounted vessel with casters. 21" dia x 27" Straight side (OAH - 74"). Jacket rated 6 Bar (90 PSI) @ 50 deg C. (2) Disper-mixers 5.5 KW (7.5 HP) & 3.6 KW (5 HP), Side Scraper .37 KW (1/2 HP). Hydraulic Lifting device, Controls. Built 1998, S/N: 15983. (Made in Germany) Tri-shaft.
Item # bm-287
(2) Each Bridge mounted Hamilton 2 HP Sweep mixer with scraper blades and 2 HP Tree Agitation for 350 gallon Kettle. New motors included.
Item # bm-283
30 HP HOCKMEYER model HVR.25 Disperser. Motor is 30 HP, 200/230/460 volt, 1770 RPM, XP vari-speed motor. Has Stainless Steel. 42" lgth. x 2" dia. shaft with 8" Dia. blade. Has approx. 100 Gallon 26" dia. x 45" T/T, Jacketed, 304 Stainless Steel tank with open top and dish bottom. Mounted on stand with air/oil lift.
Item # bm-279
10 HP, ROSS Disperser/High Shear Mixer/Homogenizer. 10 HP, 3500 RPM, 230/460 volt, Explosion Proof Motor. Shaft is 3'6" lgth. 73" Overall Height from top of motor to bottom of Shaft, not including lifting eyes. 4" Dia. mixing head. Homogenizing Mixer.
Item # bm-277
Used clamp-on stainless steel mixer/variable speed agitator with digital readout. Driven by 1/2 HP, 1725 RPM, 115 Volt, single phase motor. Has a 30" lgth. shaft with collapsible agitator blades (approx. 8" in diameter when open) for easy installation inside a port.
Stainless Steel (SS)
Item # bm-272
used 76 Cu.Ft. (2,150 L/560 gal) JH Day Stainless Steel, Full Vacuum Rated Nauta Mixer system/Conical mixer. Model MK 2 FB-76. 304 Stainless Steel. Has 20 HP, 230/460 volt, 1800 rpm drive for orbital arm with 3 RPM output and 3 HP, 230/460 volt motor for screw with 120 RPM output. Approx. 12'4" from top of blender to bottom. Includes 5HP Kinney Liquid ring vacuum pump model 75-KF and 15 HP Moyno model 2II065G2 CDR discharge pump.
304 STAINLESS STEEL
Item # bm-260
Used 35 cuft (1 m3) Krauss Maffei Titus Nauta mixer/conical vacuum blender and dryer, conical dryer. Model TMT1/200. 316 Ti Stainless steel vessel with 316L stainless steel screw. Rated -14.5 PSI/ 40 PSI @ 330 degF (-1/3 bar g @ 165 degC). Jacket and Screw rated 90 PSI @ 330 degF (6 bar @ 165 degC). Screw is 8" dia (200mm). Variable speed, rotational speed of screw blending/drying is 9.7 to 97 RPM. Discharging downward 9.7 to 18 RPM, discharging upward 9.7 to 27 RPM. Jacket capacity is 45 gallon (170 L), screw capacity is 3 gallon (12 L). Main drive is 15 HP, 460 V UL Class 1/2 group C/D. Discharge conveyor is 3 HP, 230/460 V.
316 Ti/316L Stainless Steel
Item # bm-257
used 2 Cu.Ft. Paterson Kelley Twin Shell Blender. Sanitary, Stainless Steel with Pharmaceutical grade finish. Rated 60 Lbs./Cu.Ft. material density. Unit has provisions for Liquid/Solids dispersion Bar. (No Bar installed) Shell has chain driven 3/4 HP, 208-220/440 volt with gear reducer for 25 RPM output. Bar drive is 2 HP with belts and guard. 6" Discharge with butterfly valve. 37" floor clearance. 14" charging ports with removable vented covers. Last use was pharmaceutical.
Item # bm-255
Used Double Planetary Mixer. Believed to be a ROSS CDM-150, 150 gallon. Unit comes with (11) 40" ID x 32" Deep, Carbon Steel Mix Cans with 4" outlets with valve. 15 HP, 1800 rpm, 208-220/440 volt, Explosion Proof motor into Delroyd gear reducer with 89.48:1 ratio (approx. 20 RPM output). It appears to be a CDM-150. **Video of unit running is available.**High viscosity mixer.
Item # bm-252
8 Qt. used, Patterson Kelley Twin Shell, Liquid-Solids Blender. Stainless Steel. Unit has drive and provision for intensifier bar (bar not included). Bar drive is 3/4 HP, 3450 RPM, 115/230 v, 1 ph. Blender drive is 1/15 HP, 115 volt. Approx blender speed is 25 RPM. Laboratory blender, pilot scale blender.
Item # bm-242
(2) EACH, 600 Gallon LEE 316L Stainless Reactor / Kettle with 1/2 Pipe jacket and High Speed Greerco Disperser. Polished internal Rated 15/FV @ 100 Deg.F. Internal and 100 PSI @ 338 Deg.F on Jacket. Has Greerco model 4HRFM 96, 15 HP, 230/460 volt, 3525 RPM Disperser. 2.5" center bottom outlet reducing to 2" actuated ball valve.
316L Stainless Steel
Item # bm-233
Used ROSS model RVMS-100. Pharmaceutical mixing reactor. Rated 30 PSI @ 300 Deg.F. Has "Egg Beater" and turbine blade on one mixing shaft. Mixer drive is Lightnin 1.74 HP, 208-220/440 volt, 1725/1425 RPM. Has lift to raise mixer and lid.
Item # bm-230
1.5 HP Lightnin Agitator model XLO-100D. Motor is 1.5 HP, 1725 RPM, 208-220/440 volt. Shaft is Stainless Steel 2" dia. x 44" Length with 2 sets of turbine props. one is approx. 26" dia. and one is approx. 20". Unit mounted on Stainless Steel bridge that measures 59.25" length x 16" wide with attached baffle. Last used on a 350 Gallon kettle. SOME MAY NOT HAVE BAFFLE. Lightnin Mixer.
Item # bm-223
65 Cu.Ft. (1840 Liter) working capacity, Jacketed Plow / Plough Mixer Model AG 78 built by Walter Equipment Ltd. (Similar to Littleford FKM-3000). Jacket rated to 15 PSI. Mixing chamber is 115.5" L x 44.5 ID. Main Drive is 60 HP, 460 volt, 1775 RPM into gear box with 155 RPM out (Mixing shaft speed is approx. 100 RPM). Equipped with (4) 10 HP, 208-230/460 volt, 3505 RPM Choppers. Similar size to Littleford FKM-3000
304 STAINLESS STEEL
Item # bm-209
2400 Liter working capacity Fryma model VME 2400 vacuum mixer (~650 gallon), triple shaft, tri-shaft mixer. Fabrication # M10510. The tank has an overall height is 101" to top of lid including legs. It is 87" to the top with the lid removed. The overall diameter of tank with jacket is 63". The interior dimensions are 61" diameter with 54" straight side height, 11" dome top and 11" dish bottom. Working temperatures are 150 c for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. There are two agitator drives, a 7.5 hp motor drives a center 3 prop agitator and a scrape agitator through a chain drive and a 50 hp motor drives a disperser type agitator off to the side of the center shaft. The top has an 8" flanged opening that is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary, and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/ 460 vac 3 phase electrical supply. Previously used for toothpaste. Good Condition.
316 Stainless Steel
Item # bm-208
Agitator, Flange Mount, Mfr. Veenstra B.V. De Holwert 10, Type FRA-150, Holland, Mach # 98.096, 277/480 volt, 1.1 KW (1.5 HP). Stainless Shaft, 36" lgth. x 1.25" dia. with 8" mixing blade.
Item # bm-172
Philadelphia Mixer/agitator. Model# PTEM-12-400, s/n 306296. 1750 RPMi, 25 RPMo, 70.1:1 ratio. 15 HP, 1765 RPM, 230/460 V. Flange mount.
Item # bm-163
AGITATOR/MIXER: Lightnin clamp-on mixer, model 10X, .5 HP, 1720 RPM, 115 V, single phase with plug. Has 22" SS shaft with (1) prop type blade, 2.5" diameter.
Stainless Steel (SS)
Item # bm-147
(2) Each: used 30 cu.ft. Gemco Double Cone blenders. Stainless Steel. Rated 125 lbs/cu.ft.. 13.4 RPM blend speed. 4" rotary airlock valve discharge. 5 HP, 1730 RPM, 230/460 V, Positioner motor is 2 HP, 1730 RPM into gear 10:1 ratio. With control panel. Operating height without extensions is 151.75". Extensions add ~31".
304 Stainless Steel (SS)
Item # bm-119
5 HP Agitator drive with 3" diameter x 14'L stainless steel shaft. Rated 38.9:1 ratio, 29 RPMo. Motor is 5 HP, 1160 RPMi, 440 V, explosion proof (XP).