Blenders / Mixers (DISPERSER)
Sub-Categories
used High Speed Disperser built by Premier. Model D25 Dispersator
Item # bm-411
*15% OFF* used High Speed Disperser built by Premier. Model D25 Dispersator, s/n D25-0019. Great for mixing 5 gallon buckets. Driven by 1.5 HP, 3450 RPM, 208-230/460 V, UL rated explosion proof XP motor. Stainless Steel shaft is approx. 12" L with dispersion blade. High Shear post mixer. VIDEO OF UNIT RUNNING AVAILABLE UPON REQUEST.
DISPERSER
1.5 HP
STAINLESS STEEL
PREMIER
D25 DISPERSATOR
D25 0019
used 15 HP HOCKMEYER model HV.15 Disperser with XP motor
Item # bm-409
Used Hockmeyer Disperser, Model HV15. 1-3/4" Diameter x 41" long 304 stainless steel shaft with a 5-1/2'' diameter blade. Will center in an approximate 40" diameter can. 360 degree rotation, 53-1/2" rise, air/oil lift, tank holder. Hand operated variable speed pulley drive, speed range approximately 650-3200 rpm. Unit driven by a 15 hp, 3/60/230/460 volt, 1760 rpm XP motor. Base mounted
DISPERSER
15 HP
STAINLESS STEEL
HOCKMEYER
HV15
77613
MixMor clamp-on agitator/mixer Model G-15 for sale
Item # bm-380
(2) MixMor clamp-on agitator/mixer. Model G-15. UL rated (explosion proof, XP). Stainless steel shaft 1.25" dia x 36" L. Unit 5' OAH. 2 blades on each shaft (one prop type, one disperser type). 1.5/1 HP, 230/460/190/380 V, 1760/1460 RPM, 60/50 Hz. There are (2) mounting stands/lifts available, 7' OAH (sold separately).
AGITATOR
1.5/1 HP
MixMor
G-15
Ross Model PVM-2, triple motion stainless steel mixer
Item # bm-353
Used Ross Model PVM-2, triple motion stainless steel mixer. 2 gallon. Stainless steel jacketed change can. Tri-Shaft Vacuum mixer. Triple mixers including (1) 1/2 hp 3 phase 60 cycel 208-230/460 volt 1725 rpm three wing anchor agitator with scrapers on side and bottom of can. (1) 3/4 hp 3 phase 60 cycle 208-230/460 volt 3450 rpm High Speed disperser. (1) 3/4 hp 3 phase 60 cycle 208- 230/460 volt 3450 rpm High shear rotor stator mixer. Mixer motors 30 Hp 3 phase 60 cycle 230/460 volt 1765 rpm. Change can is jacketed and on castors. Hydraulic lift. Includes Mokon heater Model DB41109BF 3 phase 60 cycle 460 volt 9 kw. Mounted all on mobile cart.
TRI-SHAFT
2 Gallon
STAINLESS STEEL
ROSS
PVM-2
52147
Ross Model PVM 40 triple motion stainless steel Vacuum rated mixer
Item # bm-352
Used Ross Model PVM 40 triple motion stainless steel Vacuum rated mixer. 40 gallon. Stainless steel jacketed change can 50 psi. Tri-Shaft Vacuum mixer. Triple mixers including (1) three wing anchor agitator with scrapers on side and bottom of can and (2) High Speed disperser (one shaft is carbon steel, all other shafts/blades stainless steel). Change can is on castors. Can serial number 11012-1A, National board number 414. Built 1994. Hydraulic lift.
VACUUM
40 Gallon
STAINLESS STEEL
ROSS
PVM-40
Ross Model PVM 40 dual motion stainless steel mixer.
Item # bm-351
Used Ross Model PVM 40 dual motion stainless steel mixer. 40 gallon. S/N 4075. Stainless steel jacketed change can 50 psi. Vacuum mixer. Dual mixers including (1) three wing anchor agitator with scrapers on side and bottom of can and (1) High Speed disperser. Rear motor is 3 HP, 208-230/460, 1745 rpm and the main drive is 5 HP, 208-230/460 volt, 1760 rpm. Change can is on castors. Can serial number 11012-1B, National board number 415. Built 1994. Hydraulic lift.
VACUUM
40 Gallon
STAINLESS STEEL
ROSS
PVM-40
4075
Ross Model PVM300 Triple Motion Stainless Steel Mixer
Item # bm-350
Used Ross Model PVM300 Triple Motion Stainless Steel Mixer. Mixing capacity 150 to 300 gallon. Full capacity 398 gallon. Stainless steel jacketed change can 15 psi. Vacuum mixer. Triple mixers including (1) three wing anchor agitator with scrapers on side and bottom of can. (1) High Speed disperser. (1) High shear rotor stator mixer (requires head and cage). Mixer motors (1) 15 Hp and (2) 30 Hp 3 phase 60 cycle 230/460 volt 1765 rpm. Change can is jacketed and on castors. Hydraulic lift.
VACUUM
300 Gallon
STAINLESS STEEL
ROSS
PVM-300
101263
Ross Model PVM300 dual motion stainless steel mixer
Item # bm-349
Used Ross Model PVM300 dual motion stainless steel mixer. Mixing capacity 150 to 300 gallon. Full capacity 398 gallon. Stainless steel jacketed change can. Vacuum mixer. Dual mixers including (1) three wing anchor agitator with scrapers on side and bottom of can. (1) High Speed disperser. Mixer motors 20 Hp 3 phase 50 cycle (with Foxboro Jordan 50/60 cycle converter). Change can is jacketed. Hydraulic lift.
VACUUM
300 Gallon
STAINLESS STEEL
ROSS
PVM-300
2400 liter Fryma VME-2400 Vacuum Processing Vessel, Sanitary
Item # bm-348
used 2400 liter Fryma VME-2400 Vacuum Processing Vessel, Dual Shaft, Sanitary construction, 2400 Liter (630 Gallon) working capacity. There are two agitator drives. A 7.5 hp motor drives a center 3 blade counter rotating agitator and a scrape agitator through a chain drive. A 50 hp motor drives a disperser type agitator off to the side of the center shaft. Working temperatures are 150 Deg.C (302 Deg.F.)for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. The top has an 8" flanged opening that can be used for a colloid mill (not included) currently it is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/460 vac 3 ph electrical supply. Previously used for toothpaste. Tri-Shaft
VACUUM
630 Gallon
STAINLESS STEEL
FRYMA
VME-2400
4891
Lightnin model MXC-70V Mixer. 30 HP Explosion Proof (XP) Mixer/Agitator/Disperser for sale
Item # bm-346
used Lightnin model MXC-70V Mixer. 30 HP Explosion Proof (XP) Mixer/Agitator/Disperser. Output RPM 900/450. Motor is 30 HP, 1175 rpm, 460 volt. Has Johnson Speed Controller/Selector. Stainless Steel Shaft is 2.5" dia. x 98" lgth. with prop and 14" dia. Dispersion Blade (Shaft reduces to 2" Dia. near Blades). Approx. 12" Flg. mount (19" OD. , 17" Bolt centers).
AGITATOR
30 HP
STAINLESS STEEL
LIGHTNIN
MXC-70V
92A8794201
Ross VMC-2 Triple Shaft (tri-shaft) Versamixer Mixer
Item # bm-299
Ross VMC-2 Triple Shaft (tri-shaft) Versamixer Mixer. 316 Stainless Steel construction. Vacuum capable. 2 gallon jacketed Vacuum capable mixing can with provision for thermal couple probe (Type J). 50 PSI jacket. Sanitary 80 grit finish. Explosion proof drives and controls. Anchor agitator driven by 1HP, 230/460 volt xp motor (2) high speed dispersers each driven by 1 HP, 230/460 volt motor. Air over bowl lift/lower mechanism. Lift System: 80-100psig/ 4-5 scfm. Electrical 115V/60Hz. Included are the the unit and electrical mounted on the unit. No main control panel included. Serial# 104930. High viscosity mixer.
TRI-SHAFT
2 Gallon
316 STAINLESS STEEL
ROSS
VMC-2
104930
HOCKMEYER model HVR.25 Disperser. Motor is 30 HP
Item # bm-283
30 HP HOCKMEYER model HVR.25 Disperser. Motor is 30 HP, 200/230/460 volt, 1770 RPM, XP vari-speed motor. Has Stainless Steel. 42" lgth. x 2" dia. shaft with 8" Dia. blade. Has approx. 100 Gallon 26" dia. x 45" T/T, Jacketed, 304 Stainless Steel tank with open top and dish bottom. Mounted on stand with air/oil lift.
DISPERSER
30 HP
HOCKMEYER
HVR-25
81.2080
ROSS Disperser/High Shear Mixer/Homogenizer
Item # bm-279
10 HP, ROSS Disperser/High Shear Mixer/Homogenizer. 10 HP, 3500 RPM, 230/460 volt, Explosion Proof Motor. Shaft is 3'6" lgth. 73" Overall Height from top of motor to bottom of Shaft, not including lifting eyes. 4" Dia. mixing head. Homogenizing Mixer.
HIGH SHEAR
10 HP
ROSS
600 Gallon LEE Stainless Reactor / Kettle jacket and Greerco Disperser
Item # bm-242
(2) EACH, 600 Gallon LEE 316L Stainless Reactor / Kettle with 1/2 Pipe jacket and High Speed Greerco Disperser. Polished internal Rated 15/FV @ 100 Deg.F. Internal and 100 PSI @ 338 Deg.F on Jacket. Has Greerco model 4HRFM 96, 15 HP, 230/460 volt, 3525 RPM Disperser. 2.5" center bottom outlet reducing to 2" actuated ball valve.
DISPERSER
600 Gallons
316L Stainless Steel
GREERCO/LEE
4HRFM 96
2400 Liter working capacity Fryma model VME 2400 vacuum mixer
Item # bm-209
2400 Liter working capacity Fryma model VME 2400 vacuum mixer (~650 gallon), triple shaft, tri-shaft mixer. Fabrication # M10510. The tank has an overall height is 101" to top of lid including legs. It is 87" to the top with the lid removed. The overall diameter of tank with jacket is 63". The interior dimensions are 61" diameter with 54" straight side height, 11" dome top and 11" dish bottom. Working temperatures are 150 c for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. There are two agitator drives, a 7.5 hp motor drives a center 3 prop agitator and a scrape agitator through a chain drive and a 50 hp motor drives a disperser type agitator off to the side of the center shaft. The top has an 8" flanged opening that is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary, and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/ 460 vac 3 phase electrical supply. Previously used for toothpaste. Good Condition.
VACUUM
2400 LTR
316 Stainless Steel
FRYMA
VME-2400/VME2400